|
|
| |
|
Powermate 330
Accessories & Upgrades |
| |
|
| EP11-100-3304 |
Trend Diagnostic
Option (Requires Data Trending & 2MB Memory) |
| |
Provides the
ability to save any analysis screen on a user-selected
interval to provide a detailed diagnostic analysis of a
site. Also allows the System Power table to display energy
(watt-hr) or demand information over the selected intervals.
When combined with the TREND analysis and 2MB memory,
screens spanning more than 2 days at 1-second resolution
with up to 8 parameters may be captured. |
| |
|
| Z330-VLTIN-SLV |
330V Upgrade |
| |
Allows Flexible
or HV Optic current probes (which produce voltage output
signals) to be directly connected to the 3-Phase current
inputs of the Model 330 for Primary Side Line power
analysis. For full usage, a set of (3)
Flex or (3)
HV Optic current probes
(voltage output type) must be purchased. Option installs
inside 330 housing. |
| |
|
| Z-HICHACC PREV3 |
Upgrade for Model 330
Pre-Version 5 Electronics |
| |
While
maintaining all specifications of the Model 330 Base unit,
advanced circuitry can now be added to improve the accuracy
to the best available in a field test unit (including
probes). This upgrade can be applied to all Model 330 units
to achieve a field energy test accuracy, including IQ test probes, to better
than 0.10%. |
| |
|
| EP10-320-3308 |
Safety Ground Cable
(green) |
| |
|
| 10-320-3321 |
A, Neutral Voltage
Lead Cable w/ banana jacks (red/white) |
| 10-320-3324 |
B, C Voltage Lead
Cable w/ banana jacks (yellow/blue) |
| |
|
| EP10-320-3300 |
A, Neutral Current
Lead Cable (red/white) |
| EP10-320-3303 |
B, C Current Lead
Cable (yellow/blue) |
| |
|
| 10-350-7356 |
Set of (3) IQ
("Duckbill") Test Switch Probes (20A, 600V) |
| EP10-100-3319 |
Single IQ ("Duckbill")
Test Switch Probe (20A, 600V) |
| |
|
| EP10-320-3306 |
330V Router Cable |
| |
For 330V units
only |
| |
|
| EP10-320-0435 |
330 to Model 430
Control Cable (6' Lead) |
| |
|
| EP10-320-3307 |
CT Burden Cable |
| |
|
| EP41-900-0015 |
4' Coax BNC Cable |
| |
For connection
to HV Optic Current Probes |
| |
|
| EP10-320-3310 |
15' Extension Cable
for Flex Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3312 |
25' Extension Cable
for Clamp-On Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3309 |
RS232 Communication
Cable |
| |
|
| EP29-100-0012 |
Battery (BMC, 12V,
2.4AH) |
| |
|
| EP75-100-0010 |
Battery Charger
(12VDC, 800mA) |
| |
|
| 22-100-1520 |
Carrying Case for
Accessories |
| |
|
| VARIOUS |
Current Probes |
| |
|
| VARIOUS |
Meter Pickups |
| |
|
| VARIOUS |
Meter Base Adapters |
| |
|
| |
|
|
|
Powermate 730
Accessories & Upgrades |
| |
| Z-730-CTPKG(STD) |
730 CT Current
Drive Kit |
| |
Option
allows user to bench-top test window-type CT's to 200A
looped max. Requires firmware version level 3.06E
and higher. |
| |
|
| EP10-320-3308 |
Safety Ground Cable
(green) |
| |
|
| 10-320-7302 |
A, Neutral Voltage
Lead w/ banana jacks (red/white) |
| 10-320-3324 |
B, C Voltage Lead
w/ banana jacks (yellow/blue) |
| |
|
| EP10-320-0432 |
3-Phase Direct
Current Cable |
| |
Terminated
with "duckbill" style current probes |
| |
|
| 10-350-7354 |
3-Phase Clamp-On
Probe Adapter Cable |
| |
Required for
use with all clamp-on current probe sets (A,B,C,N) |
| |
|
| 10-100-3480 |
Step-Down
Transformer Box |
| |
2:1 step
down voltage transformer to allow safe operating
voltages for the current source power supply |
| |
|
| EP10-320-0433 |
Jumper Cable Leads
(Set of 4) |
| |
|
| EP41-900-0015 |
4' Coax BNC Cable |
| |
For
connection to HV Optic
Current Probes |
| |
|
| EP10-320-3310 |
15' Extension
Cable for Flex Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3312 |
25' Extension
Cable for Clamp-On Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-0732 |
Calibration Cable
Set |
| |
For customer
calibration check interfacing the shop standard.
Includes written procedure. Requires EP10-100-3324
Calibration Pulse Adapter. |
| |
|
| EP10-320-3309 |
RS232
Communication Cable |
| |
|
| EP29-100-0012 |
Battery (NICD,
12V, 2.4AH) |
| |
|
| EP75-100-0010 |
Battery Charger
(12VDC, 800mA) |
| |
|
| 22-100-1520 |
Carrying Case for
Accessories |
| |
|
| EP10-400-0730 |
Carrying Case for
730 Unit |
| |
Includes
piano-hinged lid with pouch for accessories |
| |
|
| VARIOUS |
Current Probes |
| |
|
| VARIOUS |
Meter Pickups |
| |
|
| VARIOUS |
Meter Base Adapters |
| |
|
| |
|
|
|
Powermite 310
Accessories & Upgrades |
| |
|
|
EP11-100-3310 |
2 MB
Expansion Memory |
| |
Static RAM with battery backup for additional field data
storage. Information may be saved internally in the unit
(40 tests with base unit; 250 tests with 2MB memory
upgrade). |
| |
|
|
EP11-100-3308 |
Harmonics Analysis |
| |
Up to the 50th order |
| |
|
|
EP10-320-3100 |
3-Phase Voltage Lead Cable |
| |
Includes A, B, C, and Neutral connections |
| |
|
|
EP10-320-3101 |
3-Phase Clamp-On Probe Adapter Cable + Burden |
|
Required for use of clamp-on probes; requires
EP10-320-3307 for burden testing |
| |
|
|
EP10-320-3102 |
3-Phase Current Cable with IQ Probe Set + Burden |
|
Terminated with "duckbill" style current probes |
| |
|
| EP10-320-3307 |
CT Burden Cable |
| |
|
| EP10-320-3310 |
15' Extension
Cable for Flex Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3312 |
25' Extension
Cable for Clamp-On Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3309 |
RS232
Communication Cable |
| |
|
| EP29-100-0310 |
Battery (NICD,
12V, 1.5AH) |
| |
|
| EP75-100-0011 |
Battery Charger
(12VDC, 800mA) |
| |
|
| 22-100-1520 |
Carrying Case for
310 Unit |
| |
|
| VARIOUS |
Current Probes |
| |
|
| VARIOUS |
Meter Pickups |
| |
|
| VARIOUS |
Meter Base Adapters |
| |
|
| |
|
|
|
Powermate 330A
Accessories |
| |
|
| CALL FOR PART # |
Upgrade to 730A
Current Source |
| |
Includes
hardware and software upgrades for an integrated 3-phase
synthesized current source for phantom load meter
testing (FL, LL, PF) |
| |
|
| 10-350-7351 |
3-Phase Voltage
Lead Cable + Safety Ground |
| |
Includes A,
B, C, N, and Safety Ground terminated with banana jacks |
| |
|
| CALL FOR PART # |
3-Phase Direct
Current Cable + Burden |
| |
Terminated
with "duckbill" style current probes; includes separate
cable for burden testing |
| |
|
| 10-350-7354 |
3-Phase Clamp-On
Probe Adapter Cable |
| |
Required for
use with all clamp-on current probe sets (A,B,C,N) |
| |
|
| 10-350-7355 |
CT Burden Cable |
| |
|
| EP41-900-0015 |
4' Coax BNC Cable |
| |
For connection
to HV Optic Current Probes |
| |
|
| EP10-320-3310 |
15' Extension Cable
for Flex Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3312 |
25' Extension Cable
for Clamp-On Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3309 |
RS232 Communication
Cable |
| |
|
| EP29-100-0012 |
Battery (BMC, 12V,
2.4AH) |
| |
|
| EP75-100-0010 |
Battery Charger
(12VDC, 800mA) |
| |
|
| 22-100-1520 |
Carrying Case for
Accessories |
| |
|
| VARIOUS |
Current Probes |
| |
|
| VARIOUS |
Meter Pickups |
| |
|
| VARIOUS |
Meter Base Adapters |
| |
|
| |
|
|
|
Powermate 730A
Accessories |
| |
|
| 10-350-7351 |
3-Phase Voltage
Lead Cable + Safety Ground |
| |
Includes A,
B, C, N, and Safety Ground terminated with banana jacks |
| |
|
| 10-350-7301 |
3-Phase Direct
Current Cable |
| |
Terminated
with "duckbill" style current probes |
| |
|
| 10-350-7354 |
3 Phase Current
Probe Adapter Cable |
| |
Required for
use with all clamp-on current probe sets (A,B,C,N) |
| |
|
| 10-100-3480 |
Step-Down
Transformer Box |
| |
2:1 step
down voltage transformer to allow safe operating
voltages for the current source power supply |
| |
|
| EP10-320-0433 |
Jumper Cable Leads
(Set of 4) |
| |
|
| EP41-900-0015 |
4' Coax BNC Cable |
| |
For connection
to HV Optic Current Probes |
| |
|
| EP10-320-3310 |
15' Extension Cable
for Flex Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-3312 |
25' Extension Cable
for Clamp-On Probes |
| |
Multiple
extensions can be used for further length |
| |
|
| EP10-320-0741 |
Calibration Cable
Set |
| |
For customer
calibration check interfacing the shop standard.
Includes written procedure. Requires EP10-100-3324
Calibration Pulse Adapter. |
| |
|
| EP10-320-3309 |
RS232 Communication
Cable |
| |
|
| EP29-100-0012 |
Battery (BMC, 12V,
2.4AH) |
| |
|
| EP75-100-0010 |
Battery Charger
(12VDC, 800mA) |
| |
|
| 22-100-1520 |
Carrying Case for
Accessories |
| |
|
| VARIOUS |
Current Probes |
| |
|
| VARIOUS |
Meter Pickups |
| |
|
| VARIOUS |
Meter Base Adapters |
| |
|
| |
|
|
|
Current Probes (for all models) |
| |
|
|
EP10-100-3322 |
Set of (3) PX186 Clamp-On Current
Probes (100A, 600V, 0.47" opening) |
|
EP10-100-3323 |
Single PX186 Clamp-On Current Probe
(100A, 600V, 0.47" opening) |
| |
|
|
Z-MN313-PKG |
Set of
(3) MN313 Clamp-On Current Probes (200A, 600V) |
| CALL
FOR PART # |
Single
MN313 Clamp-On Current Probe (200A, 600V) |
| |
|
|
Z-PX604-PKG |
Set of (3) PX604 Clamp-On Current
Probes (1000A, 600V, 2.13" opening) |
|
EP10-100-3313 |
Single PX604 Clamp-On Current Probe
(1000A, 600V, 2.13" opening) |
| |
|
|
Z-PX800-PKG |
Set of (3) PX800 Clamp-On Current
Probes (1000A, 600V, 2x5" rectangular) |
|
EP10-100-3314 |
Single PX800 Clamp-On Current Probe
(1000A, 600V, 2x5" rectangular) |
| |
|
|
Z-PX830-PKG |
Set of (3) PX830 Clamp-On Current
Probes (3000A, 600V, 2x5" rectangular) |
|
EP10-100-3315 |
Single PX830 Clamp-On Current Probe
(3000A, 600V, 2x5" rectangular) |
| |
|
|
EP10-100-3306 |
36" Flexible Current Probe
(10" Circular; 3000A, 600V) |
|
EP10-100-3308 |
48" Flexible Current Probe
(13.5" Circular; 3000A, 600V) |
| |
|
|
Z-SLWIDE-01 |
High Voltage Fiber Optic
Probe (2000A, 150kV, 4” by 6” Window) |
| |
Includes transmitter head, display receiver, 40' fiber
optic cable, 4' coax signal output cable, hanger, and
carrying case |
| |
|
| |
|
|
|
Meter Testing Pickups
(for all models) |
| |
|
| EP10-100-3311 |
Manual Pushbutton
Switch |
| |
Provides a
manual pulse input to verify meter accuracy for any
meter (6' lead) |
| |
|
| EP10-100-3327 |
IR Pulse Detector
with Flexible Arm Mount (Rev 3) |
| |
For solid
state meters; revision 3 to support new ANSI standard
200nS pulses |
| |
|
| 10-100-3328 |
IR Pulse Detector
with Flexible Arm Mount (Rev 2) |
| |
For solid
state meters; revision 2 to support meters with wide or
50% duty cycle (ex. ABB A1D model) |
| |
|
| EP10-100-3326 |
Photo Disk
Detector with Flexible Arm Mount |
| |
For
mechanical meters. |
| |
|
| 10-120-0005 |
Isolated KYZ
Contact Pickup |
| |
Rated for
use on dry contacts or powered contacts up to 480 Vac.
Connects to Powermate standard 9-pin output with
heavy-duty mini clips for making field connections to
terminal blocks. |
| |
|
| EP10-100-3309 |
Suction Cup IR
Pulse Detector (Rev 3) |
| |
Infrared
pulse detector with suction cup mount for attachment to
solid state meters. Includes magnet. Revision 3 to
support new
ANSI standard 200nS pulses. |
| |
|
| 10-100-3310 |
Suction Cup IR
Pulse Detector (Rev 2) |
| |
Infrared
pulse detector with suction cup mount for attachment to
solid state meters. Includes magnet. Revision 2 to
support meters
with wide or 50% duty cycle (ex. ABB A1D model). |
| |
|
| |
|
|
|
Meter Base Adapters (for
all models) |
| |
|
| 75-310-0013 |
Form 9 Meter Base
Test Adapter (13 Terminal) |
| |
Also used
with Form 8 and Form 6 installations |
| |
|
| 75-310-0008 |
Form 5 Meter Base
Test Adapter (8 Terminal) |
| |
|
| 75-310-0006 |
Form 4 Meter Base
Test Adapter (6 Terminal) |
| |
Also used
with Form 3 installations |
| |
|
|
| |
| |
| |
|
 |
|
Powermetrix, A Division of TEC
10737 Lexington Drive
Knoxville, TN 37932-3294 |
|
Phone:(865) 966-5856
Fax: (865) 675-1241
E-Mail: main@powermetrix.com |
|
|
| |
|
This
Site and its contents Copyright © 2007 Powermate
and Powermite are Trademarks of Technology for
Energy Corporation (TEC) All rights reserved. |
|
|
